Espin Reine 2019 User Manual page 45

To align a hydraulic disc brake
1. Decrease the tightness of the brake-attachment bolts.
2. Fully pull the lever, and tighten the bolts to 100-110 lb•in (11.3-12.4 N•m).
To align a cable-actuated disc brake
There are three parts to this procedure:
A. To adjust the clearance between the right brake-pad and the disc
1. Turn the fixed-pad adjuster.
2. If the pads can not be adjusted correctly in this manner, follow the instructions "To
adjust the clearance between the left brake pad and the disc," and then adjust the right
pad.
B. To adjust the clearance between the left brake-pad and the disc
1. Turn the cable barrel-adjuster: clockwise to increase clearance, counterclockwise to
decrease clearance.
2. If the pads can not be adjusted correctly, decrease the tightness of the cable-clamp
bolt and re-attach the cable. Tighten the cable-clamp bolt to 50-70 lb•in (5.7-7.9 Nm).
3. After adjustment, turn the lock-nut clockwise to make sure the adjustment does not
45