Oven Vent And Racks; Air Circulation In The Oven - Kenmore 790.4717 Series Use & Care Manual

Hide thumbs Also See for 790.4717 Series:
Table of Contents

Advertisement

Available languages

Available languages

Oven Vent and Racks
Oven Vent
Location
Some mode{e are equipped
with a blower which rune in baking
and eeff-c{eaning
mode to keep aH interna} components
at a cool temperature.
The b{ower may keep running
even if the oven has been turned off, until the
components
have cooled down.
Oven
Vent
Location
The oven is vented at the center trim. When the oven is on, warm air is released
through the vent. This venting is necessary for proper air circulation in the oven and
good baking results.
Arranging
Oven
Racks
ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO
OPERATING
THE OVEN). Always use oven mitts when using the oven.
To remove an oven rack, pull the rack forward until it stops, Lift up front of rack and
slide out.
To repIace an oven rack, fit the rack onto the guides on the oven walls, Tilt the front
of the rack upward and slide the rack back into place,
Air Circulation
in the Oven
If using 1 rack, place in center of oven, If using multiple racks, stagger
cookware as shown,
For best air circulation and baking results allow 2-4" (5-10 cm) around the
cookware for proper air circulation and be sure pans and cookware do not
touch each other, the oven door, sides or back of the oven cavity, The hot air
must circulate around the pans and cookware
in the oven for even heat to
reach around the food,
1 Oven Rack
Multiple Oven Racks

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

790.4778 series790.4783 series

Table of Contents