The device settings are returned to their default factory
values and the device is in the state it was when delivered�
and then
ADAP
ready for adaptation� Confirm starting adaptation by press-
ing
�
OK
Standby Mode
1�
Press the
2�
Select the
3�
Select the
4�
Confirm by pressing
the display automatically switches back to Standby
mode�
In Step 3, select
Frost Protection Function
This function is automatically active�
The frost protection function prevents the radiator from
freezing�
If the temperature drops to below 6 °C, the device opens
the radiator valve until the temperature increases again to
over 8 °C�
Calcification Protection Function
This function is automatically active�
The device performs a calcification protection operation
weekly to prevent calcification of the radiator valves�
appear in the display� The device is
INST
button�
Menu
menu option� Confirm by pressing
STBY
menu option�
AN
OK
to switch Standby mode off�
AUS
� After approx� 30 seconds,
�
OK
47
G