Frost Protection Function; Calcification Protection Function - Silvercrest RT2000 Operating Manual

The device settings are returned to their default factory
values and the device is in the state it was when delivered.
and then
ADAP
ready for adaptation. Confirm starting adaptation by press-
ing �
OK
Standby Mode
1�
Press the
2�
Select the
3�
Select the
4�
Confirm by pressing
the display automatically switches back to Standby
mode�
In Step 3, select

Frost Protection Function

This function is automatically active.
The frost protection function prevents the radiator from
freezing�
If the temperature drops to below 6 °C, the device opens
the radiator valve until the temperature increases again to
over 8 °C�

Calcification Protection Function

This function is automatically active.
The device performs a calcification protection operation
weekly to prevent calcification of the radiator valves.
48
G
appear in the display. The device is
INST
button.
Menu
menu option. Confirm by pressing
STBY
menu option�
AN
OK
to switch Standby mode off.
AUS
. After approx. 30 seconds,
�
OK