Kenmore 790.4907 Series Use & Care Manual page 28

Hide thumbs Also See for 790.4907 Series:
Table of Contents

Advertisement

Available languages

Available languages

Seff-C eaning
mNSTRUCTmONS
PRESS
DmSPLAY
Stopping
or mnterrupting
a Seff-C_eaning
Cycle
If it becomes necessary to stop or interrupt a self-cleaning
cycle
due to excessive smoke or fire in the oven:
1, Press _.
2,
Once the oven has cooled down for approximately
1 HOUR
and the "DOOR LOCKED" icon is no longer displayed, the
oven door can then be opened (Figure 1),
Note: Self°Clean cycle can never be set to start more than 12 hours in advance,
@
Figure 1
Adjusting
Oven Temperature
The temperature
in the oven has been pre-set at the factory, When first using the
oven, be sure to follow recipe times and temperatures,
If you think the oven is cooking
too hot or too cool for the temperature you select, you can adjust the actual oven
temperature to be more or less than what is displayed, Before adjusting, test a recipe
by using a temperature setting that is higher or lower than the recommended
temperature, The baking results should help you to decide how much of an adjustment
is needed,
INSTRUCTIONS
To adjust
the oven temperature
higher
1,
Press _
for 6 seconds (Figure 2),
v
2,
To increase the temperature
use the number pads to enter the
change,
(Example 30°F) (_
@
(Figure 3),
desired
The
temperature may be increased as much as 35°F (19°C),
3,
Press s(_
to accept the temperature change
and
the
will return to the time of day (Figure 4), Press _
to
display
reject the change if necessary,
PRESS
O@
®
To adjust
the oven temperature
_ower
1,
Press _
for 6 seconds, 0° will appear in the display (Figure
v
5),
2,
To decrease the temperature use the number pads to enter the
change, (Example -30°F) (_
@
and then press
desired
_
(Figure 6),
temperature may
as
The
be decreased
much as 35°F (19°C),
3,
Press _
to accept the temperature
change and the
will return to the time of day (Figure 7), Press _,
to
display
reject the change if necessary,
O@
Q
Note: The oven
temperature
adjustments
made with this feature will
not change the Self-Clean
cycle temperature,
DISPLAY
Figure 2
Figure 3
Figure 4
Figure 5
Figure 6
Figure 7
28

Advertisement

Table of Contents
loading

Table of Contents