Kenmore 790.4907 Series Use & Care Manual page 14

Setting Oven Controls
Setting Bake
The BAKE dKE_ pad controls normal baking, if preheating is necessary, refer to the _,rE_ P reheat Feature for instructions.
The oven can be programmed to bake at any temperature from 170 ° F to 550 ° F (The sample shown below is for 350°F).
mNSTRUCTmONS PRESS DISPLAY
To set the Bake Temperature to 350°F
1. Arrange interior oven racks and place food in oven.
2. Press _AKE_, "- - - °" wiii appear and "BAKE" wiii flash in the
display (Figure 1)_
3, Press @ @ @ <Figure 2>, "BAKE" w,, c ontinue to
flash and "350 °'' wHU appear in the dispUay,
4, Press <A_, A beep wHU sound once the oven temperature
reaches 350 ° F and the dispUay wHUshow "350 °'' and "BAKE"
(Figure 3),
_} wHU canceU the Bake feature at any time,
Pressing
G
@
Figure 1
Figure 2
Figure 3
To change the Bake Temperature (example:
changing from 350°F to 425°F)
1, After the oven has already been set to bake at 350°F and the
oven temperature needs to be changed to 425°F, press _AK_
(Figure4) and "- - - ° " will appear and "BAKE" will flash in the
display,
2, Press @ @ @ <Figure 5>, "BAKE" w,, c ontinue to
flash and "425 °'' will appear in the display,
Press _A_, "BAKE" and "425 °'' will stay in the
3,
display (See
Figure 6),
G
QOQ
Figure 4
Figure 5
Figure 6
Note: if the oven was recently heated from prior cooking and
has remaining heat, the bake element symbol may not show in
the display immediately.
14