Advertisement
GENERAL INFORMATION
The HLN9742 Flashing Adapter is a DB25 male/female connector
with a three-position (A - OFF - B) toggle switch, that permits
flashing of the portable and mobile Professional Radios. The
adapter is compatible with the following cables:
For Portable Radios
•
RKN4074 Programming/Test Cable
•
RKN4075 Programming Cable (with integral electronics)
For Mobile Radios
•
RKN4083 Programming/Test Cable
•
RKN4081 Programming Cable (with integral electronics)
— with flashing adapter switch in the A position, requires
adapter cable RLN4853 (8-pin Telco jack to 20-pin Amp plug),
which adapts/connects the cable to the mobile radio
accessory port.
— with flashing adapter switch in the B position, refer to the
instructions provided with the upgrade tool that you are using
for specific instructions.
•
Refer to Figures 2 and 3 (page 5) for adapter/connection
details.
NOTE: Flashing time for programming/test cable configurations
using the RLN4008 radio interface box (RIB) is about four minutes.
Flashing time for programming cable (with integral electronics)
configurations is about two minutes.
1
Advertisement
