General Statements; Fcc Statements - Motorola LA-5137 Integration Manual

Compact flash adapter

Hide thumbs Also See for LA-5137:

Table of Contents

8-8 LA-5137 Compact Flash Adapter Integration Guide

8.7 Statements Required for the User Guide

The following statements are required in the final product user guide.

THE INFORMATION IN THIS GUIDE IS PROVIDED "AS IS" WITHOUT ANY EXPRESS OR IMPLIED WARRANTY

OF ANY KIND INCLUDING WARRANTIES OF MERCHANTABILITY, NONINFRINGEMENT OF INTELLECTUAL

PROPERTY, OR FITNESS FOR ANY PARTICULAR PURPOSE. IN NO EVENT SHALL SYMBOL BE LIABLE FOR ANY

DAMAGES WHATSOEVER (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS,

BUSINESS INTERRUPTION, LOSS OF INFORMATION) ARISING OUT OF THE USE OF OR INABILITY TO USE

THE INFORMATION IN THIS GUIDE, EVEN IF SYMBOL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH

DAMAGES. BECAUSE SOME JURISDICTIONS PROHIBIT THE EXCLUSION OR LIMITATION OF LIABILITY FOR

CONSEQUENTIAL OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT APPLY TO YOU.

Motorola further does not warrant the accuracy or completeness of the information, text, graphics, or other

items contained within this guide. Motorola may make changes to this guide, or to the products and/or

Software described therein, at any time without notice. Motorola makes no commitment to update the

Information.

Many of the statements are dependent on the application of the final product. Motorola recommends that

the OEM seeks the advice from an accredited test laboratory.

8.7.1 General Statements

Any changes or modifications not expressly approved by the OEM, could void the user's authority to operate

the equipment.

Adhoc Mode (5 GHz)

Adhoc operation of the JEDI MODULE in the 5 GHz band will be limited to 5150-5250 MHz (UNII 1)

Co-located statement

To comply with FCC RF exposure compliance requirement, the antenna used for this transmitter must not be

co-located or operating in conjunction with any other transmitter/antenna except those already approved in

this filling.

Handheld Devices

To comply with FCC RF exposure requirements, this device must be operated in the hand with a minimum

separation distance of 20 cm or more from a person's body. Other operating configurations should be

avoided.

Remote and Standalone Antenna Configurations

To comply with FCC RF exposure requirements, antennas that are mounted externally at remote locations or

operating near users at stand-alone desktop of similar configurations must operate with a minimum

separation distance of 20 cm from all persons.

Radio Frequency Interference Requirements - FCC

Table of Contents