Commissioning; Configuring The Warning Device Using Dip Switches - Pepperl+Fuchs NVD-111 Manual

Warning Device NVD-111

Commissioning

4
4.1
EN
28 - EN
Commissioning

Configuring the Warning Device using DIP Switches

Often, suspended particles (e. g. leftovers) can be found in the grease interceptor
and lumps of fat often form. These suspended particles and lumps of fat can
cause a false alarm for the fat level sensor. Therefore, it is possible to set two
possible monitoring states for the fat level sensor on the warning device via the
setting of DIP switch 1 (reaction time of the fat level sensor).