Warning Device NVD-111
Installation
3.2
EN
20 - EN
Mounting the Warning Device
Note!
If installing the device in an enclosure or switch cabinet, follow the mounting
instructions provided by the manufacturer of the enclosure or switch cabinet.
Caution!
Malfunction or damage resulting from overheating
If the external temperature exceeds 60 °C at maximum load, the device may
become damaged.
Ensure sufficient ventilation at the installation site
n
Maintain a minimum distance of 5 mm between the devices on the
n
DIN mounting rail.
Mounting the warning device on the DIN mounting rail.
Clip the device onto the DIN mounting rail.
The warning device engages with an audible click. The warning device is
mounted.
Figure 3.6
Click!