Sony WG-C10 Help Manual page 231

4-468-627-14(1)
© 2013 Sony Corporation
able to fully charge it.
When you do not use this device for a long time, disconnect the USB cable, and
store it.
Also read the Operating Instructions of other devices you use. Depending on
the device, some operation may be needed to charge the battery.
The maximum output current of the USB port of this unit is 500 mA. If the
supply output current exceeds 500 mA, the power is stopped for safety. Before
supplying power to another device, be sure to check the voltage and current
ratings of the device.
When powering a device from this product, the charging time differs depending
on the remaining battery charge.
Correct operation is not assured if a USB hub or USB extension cable is used.
Related Topic
Read this first
Go to Page Top
Go to Page Top
Notes on use
223