Sony WG-C10 Help Manual page 203

4-468-627-14(1)
© 2013 Sony Corporation
If a system software update is available, its version number is displayed.
4. Tap [OK].
The update confirmation screen is displayed.
5. Tap [OK].
The system software update starts.
To complete the system software update, the unit restarts. Connect the unit
and the iOS device again, since the wireless connection will have been stopped.
6. Confirm that the system software has been updated to the latest version by
performing steps 1 – 3.
Note
Distribution of the system software is done by updating "PWS Manager." Check the
update status of the application periodically to make sure the latest version is being
used.
Update cannot be done if the battery charge is low. Confirm that the battery charge
remains 60% or more and then perform update. See
level (iOS device)."
Do not press the RESET switch or
Update the system software in a location where communication conditions are stable.
Related Topic
Connecting an iOS device via wireless LAN
"Checking the remaining battery
(Power) button while updating.
Go to Page Top
Go to Page Top
Notes on use
195