Sony WG-C10 Help Manual page 152

Portable wireless server
Hide thumbs Also See for WG-C10:
Table of Contents

Advertisement

The file/folder list screen of the copy destination device is displayed.
5. Select the copy destination folder.
If you want to copy the file/folder to the hierarchical level directly beneath the
device, go to step 6.
Tap
(Create folder) to make a new folder, enter a file name and tap [OK].
Note that if you select an attached external storage as the copy destination, a
dedicated screen may open to prompt you to select a copy destination folder
from that screen. In this case, you can copy only one file per operation, and
can't copy any folders.
6. Tap [Copy here].
The file/folder copy starts.
When copy is complete, [Done] is displayed. Tap [OK] to finish.
Note
The source and copy destination cannot be on the same device.
Depending on the communication usage environment, it may take time to process
data or processing may stop before copy completes.
If you attempt to copy data when the battery charge of the unit or the device you
use is low, the battery may fully discharge and the copy may fail. Be sure to check
the remaining battery charge before starting to copy.
Even in the event you cannot copy to external media, etc., due to some cause such
as the unit malfunctioning, or if a defect or repair, etc., causes damage or
destruction of copied content in external media, Sony bears no responsibility for
compensation for lost content, nor responsibility for any related damages. Also, Sony
does not provide services for the recovery, restoration, duplication, etc., of copied
content, regardless of the circumstances.
144

Advertisement

Table of Contents
loading

Table of Contents