Hunter Passage 420 Owner's Manual page 12

HUI{TERMARII{E
LIMITED WARRAI{TY
EPOXY BARRIER COAT
Should a customer wish to have an epoxy barrier coat
applied to his hull, example Interlux Interprotect 1000,
2000 or West systems or Vc Tar, this will not void the
five Year Blister Warrantv.
Hunter Marine refers to epoxy barrier coatings as men-
tioned above, not epory primer paints.
During the first year of ownership, the first pwchaser
will receive two Customer Satisfaction surveys - the first
(CSS#I) will be received shortly after taking delivery
and focuses on the dealer's ability to sell and commission
the boat, and the Owner's initial satisfaction. The second
If an epoxy barrier coat is applied to a Hunter vessel, it
must be registered with the Wa:ranty Department p[ql
to application of the product. If the dealer applies bot-
tom paint only, sanding will not be allowed and the no
sanding system must be used.
survey (CSS#2), nine to ten months into ownership,
"measures" dealer service capability and allows the owner
to evaluate most of the boat's functional systems and
characteristics. Both surveys are dependent upon receipt
of the first purchaser's Warranty Registration Form.
CUSTOMER SATISFACTION SURVEYS
PAGE 4