Kohler 1093479-2-B Installation And Care Manual page 4

Before You Begin (cont.)
NOTICE: Do not install this seat in areas where water may freeze
in the pipes. If this is not feasible, make arrangements to keep the
pipes warm so that water remaining in the seat will not freeze
during storage or during the winter. Allow the unit to warm to
room temperature before reinstalling or using.
NOTE: The thermal protectors may trip during storage or
transportation in warm weather causing the unit to not operate.
Allow the unit to cool to room temperature before installation or
operation.
NOTICE: Do not block the air openings. To avoid product damage,
keep the air openings free of debris, such as lint and hair.
Observe all local plumbing, electrical, and building codes.
Only connect the seat to a cold water supply of drinking quality
at a pressure of 20 (139 kPa) - 80 psi (551 kPa).
Unplug the seat and drain the seat if the functions of the seat will
not be operated for an extended period of time.
*Outside North America, this device may be known as a Residual
Current Device (RCD).
1093479-2-B 4 Kohler Co.