+
Density determination of the test fluid
1. In weighing mode press
approx. 2 sec the display changes automatically into the density determination
mode for liquids. Reset to zero if necessary by pressing
2. Hang the sinker on the suspension device
3. The weight of the „sinker in air" is displayed.
When an optional printer is connected, the displayed value can be edited using
the PRINT button.
Wait for stability display (), then press
PBS-A03/A04-BA-e-1614
UNIT
repeatedly until [Air g d ] will be displayed. After
CAL
MENU
TARE /
.
.
23