5.2
Density determination at known volume of the sinker
Prepare the balance as described in chapter 2 „Installing density determination
set" (step 1-6).
Keep the sinker ready
Fill test liquid in the container. Filling height should be approx. ¾ of the capacity.
Control the temperature of the liquid, instruments and the displacement body until
the temperature is constant. Observe the warm-up time of the balance.
+
Mode to call up density determination of liquids
Switch on balance
In weighing mode press
PBS-A03/A04-BA-e-1614
CAL
MENU
repeatedly until „U" flashes.
19