Table of Contents
Advertisement
4. For approx. 2 s "wAtr" will be displayed. The display changes automatically to
[0.00 g d ] Remove sample from the upper sample dish and set to zero if
necessary.
5. Remove sample from the upper sample dish. Reset to zero if necessary by pressing
TARE /
.
6. Lay the sample into the lower sample dish and immerse it in the auxiliary liquid.
Make sure that the sample is at least 1 cm immersed and has, if possible, no air
bubbles adhering to it.
7. The weight of the „sample in auxiliary liquid" is displayed. When an optional printer is
connected, the displayed value can be edited using
8. Wait for stability display (), then press
The scale determines the density of the sample and then displays the result.
When „Hold display mode" is enabled, the symbol [ ] will be unhidden.
PBS-A03/A04-BA-e-1614
PRINT
.
CAL
MENU
.
15
Advertisement
Table of Contents
