Table of Contents
Advertisement
4. For approx. 2 s "wAtr" will be displayed.
The display changes automatically to " g d "
5. Remove the glass sinker. Reset to zero if necessary by pressing
6. Put glass container with test fluid onto the platform. Suspend again the glass sinker
and immerse it completely into the liquid . The weight of the „sinker in liquid" is
displayed.
When an optional printer is connected, the displayed value can be edited using the
PRINT button.
7. Wait for stability display (), then press
the liquid and then displays the result.
When „Hold display mode" is enabled, the symbol [ ] will be unhidden.
8. When connecting an optional printer, the result will be printed after pressing
Printout example:
24
CAL
MENU
. The scale determines the density of
0.9936DL
TARE /
.
PBS-A03/A04-BA-e-1614
PRINT
.
Advertisement
Table of Contents
