Kohler Stance 14787A Installation Instructions

INSTALLATION INSTRUCTIONS
BEFORE YOU BEGIN
All information is based on the latest product information available at the time of publication. Kohler Co.
reserves the right to make changes in product characteristics, packaging, or availability at any time with-
out notice.
Please leave these instructions for the consumer. They contain important information.
NOTES:
1. Flush the water supply pipes thoroughly to remove any debris.
2. An in line water filter must be used with this product.
3. Inspect the supply pipes for damage. Replace as necessary.
4. Observe local plumbing codes.
5. The recommended working pressure for the shower head is 100KPa to 500KPa. If the pressure
exceeds 500KPa a pressure reducer is required.
6. Maximum water and environmental temperature for the shower head is 60C. Note: If a heater is present,
make sure to keep it away from the shower head as otherwise the environmental temperature may
exceed 60C.
7. All installations should comply with the relevant requirements of AS/NZS 3500 and AS/NZS 6400.
ROUGH-IN DIMENSIONS
31~40
58
The Finished Wall
1138600-AN2-A 04/07/11
SHOWER TAPWARE
STANCE
Shower Arm & Shower Rose
Shower Arm & Rose: 14787A
14787A
1