Summary of Contents for Toastmaster AACU-MISER AM24SS
Page 1
™ Griddles OWNER'S OPERATING & INSTALLATION MANUAL Toastmaster ® A Middleby Company Middleby Cooking Systems Group • 1400 Toastmaster Drive • Elgin, IL 60120 • (847)741-3300 • FAX (847)741-4406 ® Part No. 37813 Price $15.00 P Apr. 98 Rev B...
Page 2
Toastmaster, A Middleby Company. ™ is a trademark of Toastmaster, A Middleby Company. Toastmaster • 1400 Toastmaster Dr. • Elgin, IL 60120-9272 • (847) 741-3300 • FAX (847) 741-4406 Middleby Corp 24-Hour Service Hotline 1-800-238-8444...
Page 3
Using any parts other than genuine Toastmaster factory parts relieves Toastmaster (manufacturer) reserves the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.
SECTION 1 DESCRIPTION... 1 A. Features...1 B. Component Location...1 C. Specifications...2 D. Electrical Specifications... 2 E. Dimensional Drawings... 3 SECTION 2 INSTALLATION... 5 A. Shipping Damage Inspection... 5 B. Unpacking the Griddle... 5 C. Installation...5 D. Electrical Connection... 6 E. Initial Cleaning... 6 F.
SECTION 1 - DESCRIPTION C. Specifications Griddle plate dimensions Overall dimensions Overall weight Shipping dimensions Shipping weight Outer body steel Griddle Grease trough Heat source Allowable temperature range D. Electrical Specifications IMPORTANT CONSULT ALL APPLICABLE NATIONAL AND LOCAL CODES BEFORE CONNECTING THE GRIDDLE TO ITS ELECTRICAL POWER SOURCE.
A. Shipping Damage Inspection IMPORTANT IT IS THE CUSTOMER’S RESPONSIBILITY TO REPORT ANY CONCEALED OR NON- CONCEALED DAMAGE TO THE FREIGHT COMPANY. 1. All shipping containers should be examined for damage before and during unloading. This equipment was carefully inspected and packaged at the factory.
SECTION 2 - INSTALLATION c. Level the griddle using a carpenter’s level. Then, rotate the “foot” (hexagonal) portion of the legs to adjust the griddle to a level position. d. Ensure that the griddle is level from front- to-back and from side-to-side. D.
A. Controls This section provides a basic description of the location and function of the griddle operating controls (all located on the control panel). Refer to the diagram below. 1. Thermostat Control Knob : corresponding griddle zone to new temperature requirements.
SECTION 3 - OPERATION D. Daily Operation And Maintenance Daily Pre-Operation 1. Season the griddle before operation daily as described in Step B, Seasoning the Griddle . 2. Always allow 15 minutes of preheat time before loading the griddle with food. This will allow the griddle surface to be saturated with heat.
E. Troubleshooting Problem Griddle is not heating. Griddle zone is not heating. If problems persist, contact your local Authorized Service Agent. Action 1. Check that the breaker/fused disconnect is in the ON position. 1. Check that the corresponding rocker switch is turned on. 2.
SECTION 4 - WIRING DIAGRAMS B. Wiring Diagram - AM36SS...
Page 16
For more information on the complete line of Toastmaster products, contact your Food Service Equipment Dealer, or write to us at the address below. A Middleby Company Middleby Corp 24-Hour Service Hotline 1-800-238-8444 Toastmaster 1400 Toastmaster Drive Elgin, IL 60120...