Capelec CAP2600 User Manual page 13

Step: Controlling high beam lamps
During this step you will control the left and right side high beam lamps of the vehicle.
First you must position the CAP2600 in front of the headlamp to be controlled. (See chapter III).
1
Step 6: Test result
In this step the appliance indicates the result of the test. You can see the results for each type of headlamp
by clicking on one of the "result" boxes.
29/06/16
2
3
The data is sent by IT connection
The data is sent to a "pdf" file on a
11
1
2
3
The data is printed
USB stick
Rev C