OBSIDIAN CONTROL SYSTEMS NX2 Installation Manual page 10

C O N N E C T I O N S : R I G H T S I D E P A N E L
N X 2
- USB device socket, suitable for USB flash drives or a keyboard. This connection is not suitable for
boot operations. Use the USB connectors on the back of the console for this purpose. Do not exceed a
500mA current on any USB device port.
- The MIDI card provides MIDI In, Out, and Thru 5-pin DIN connectors. The software supports
incoming MIDI Notes, MIDI Show Control, and MIDI Timecode signals.
- The SMPTE device offers 3-pin XLR connectors for SMPTE In and Out signals.
N X W I N G
- USB device socket, suitable for USB flash drives or a keyboard. This connection is not suitable for
boot operations. Use the USB connectors on the back of the console for this purpose. Do not exceed a
500mA current on any USB device port.
- The MIDI card provides MIDI In, Out, and Thru 5-pin DIN connectors. The software supports
incoming MIDI Notes, MIDI Show Control, and MIDI Timecode signals.
- The SMPTE device offers 3-pin XLR connectors for SMPTE In and Out signals.
10