Selecting Saved Commission Numbers; Deleting Saved Commission Numbers - FRIATEC FRIAMAT Operating Instructions Manual

5.3.2 Selecting saved commission numbers

As described in Section 5.3.1, go into the "Change/Specify commission
nos." setting menu.
By pressing the STOP button you will go into the commission no. specification
menu. If you press the INFO / MENU button the stored commission nos. will
be displayed.
The displayed commission no. is selected by pressing the START or SET
button. The process can be broken off using the STOP or RES button.
Pressing the STOP button again will take you back to the basic setting.

5.3.3 Deleting saved commission numbers

As described in Section 5.3.1, go into the "Change/Specify commission
nos." setting menu. By pressing the STOP button you will go into the
commission no. specification menu. If you press the STOP button you will go
into the Deletion menu.
The displayed Commission No. will be deleted from the commission no.
specification menu by pressing the START button. Pressing the STOP button
will display the next commission no. The fusions which have been saved
under this commission no. will be retained together with the commission no.,
but the commission no. will no longer be available in the commission no.
specification menu.
To leave the Deletion menu press the STOP button as many times as it takes
to get back to the basic setting.
Commission No.
New Selection
Commission No.
12 Dossenheimer Way
Delete
21