Commission Numbers; Specifying And Saving A Commission Number - FRIATEC FRIAMAT Operating Instructions Manual

In both cases (manual or automatic blocking) the note "Read in Operator" will
appear in the display. Your FRIAMAT
reading in an operator pass
5.3

Commission Numbers

For simple administration of up to 20 different commission numbers your
®
FRIAMAT model has a commission number specification menu.

5.3.1 Specifying and saving a commission number

Go into the main menu by pressing the MENU button. Now press the MENU
button as many times as it takes for the "commission no." setting menu to
appear in the display. To get into the "Change/Specify commission nos."
setting menu press the START button. By pressing the STOP button you will
go into the specification setting menu in which you can enter and save up to
20 commission nos. If you press the START button the current commission
no. will appear. The first character of the commission no. will flash. This can
be increased by pressing the INFO button or decreased by pressing the
MENU button. With the START / STOP button you can move left or right
within the commission no. With the SET button the commission no. set will be
saved and taken into the Specification Menu, and with the RES button you
can break off the process without saving.
Another method for getting into the "Change/Specify Commission Nos."
setting menu is to read in the COMMISSION CODE (see plastic card in the
accessories pouch).
20
®
Commission No.
Change
Commission No.
New Selection
Commission No.
12 Dossenheimer Way
model can be cleared for use by
Specification
Delete