Operational Checkout - CDI CD42-STS User Manual

Operational Checkout

When the unit is first powered on, the unit will perform a self-check.
This is indicated by a rapid back and forth scrolling of the LED array.
The LEDs on each side will flash in succession from bottom to top and
back down five times as shown here.
The CD42-STS is operational when the self-check has completed, but
you may wish to adjust the signal gain before placing the unit into
service. (See following pages.)
CD42-STS Subsea Diver/ROV Pig Location and Tracking System
Page 8 of 36