Power On - CDI CD42-STS User Manual

Power ON

Remove the large hexagonal plug located
on the antenna side of the system
to access the power switch.
(You'll need a 1–5/8-in. open-end wrench
or adjustable wrench to loosen plug).
Press the red pushbutton switch
to toggle the system power
ON/OFF.
Replace plug. Tighten until snug (do not over-tighten).
CD42-STS Subsea Diver/ROV Pig Location and Tracking System
Inspect O-ring and O-ring groove
before replacing plug (see pg. 21 for
O-Ring inspection and maintenance
information).
Page 7 of 36