CDI CD42-STS User Manual page 10

CD42-STS Subsea Diver/ROV Pig Location and Tracking System
Adjustment (cont.)
Gain
No LEDs lit indicate zero gain position. Low gain settings (1,2, and 3) are
useful when the CD42-STS is used in very close proximity to a transmitter
such as at a pig launcher or receiver.
ZERO GAIN GAIN LEVEL 3
GAIN LEVEL 8 MAXIMUM GAIN
The gain setting is stored in non-volatile memory. It is retained when the
receiver is powered down and even if batteries are removed.
When the unit is powered back up your gain setting will be displayed in
the power ON sequence.
Page 10 of 36