Abus PLMK10000 Manual page 16

Intended Use
Only use the device for the purpose for which it was built and designed. Any other use is considered
unintended.
All guarantee claims are invalid in the event of damage caused by non-compliance with this
safety information. We cannot be held liable for resulting damage.
Unboxing
Handle the device with extreme care when unpacking it.
Packaging and packaging aids can be reused and, as far as possible, should be sent for recycling.
If the original packaging has been damaged, inspect the device first. If the device shows signs
of damage, return it in the original packaging and inform the delivery service.
Please ensure that the package also contains the DSK (Z-Wave Device Specific
Key) – Card. This card shows the DSK of your ABUS Z-Wave device. Please keep
it in a safe place. Any S2 (Security 2) certified Z-Wave Gateway will require this
DSK to program your sensor.
Installation location / operating environment
Do not place any heavy objects on the device. The device is only designed for operation in spaces with
appropriate temperatures or humidity (e.g. not for bathrooms). Do also not place the device in areas
with excessive accumulation of dust. Please refer to the individual devices' technical data for more
detailed information. Ensure that: adequate ventilation is always guaranteed; no direct sources of heat
can affect the device; interior devices are not exposed to direct sunlight or strong artificial light; the
device is not in the immediate vicinity of magnetic fields (e.g. loudspeakers); no naked flames (e.g. lit
candles) are placed on or next to the device; sprayed or dripping water is prevented from coming into
contact with interior devices and caustic fluids are avoided; the device is not operated in the vicinity of
water, in particular, the device should never be submerged (do not place objects containing fluids, e.g.
vases or drinks, on or near the device); no foreign bodies penetrate the device; the device is not
exposed to wide temperature variations, as otherwise there may be condensation from humidity causing
electrical short circuits; the device is not exposed to excessive shock or vibration.
Children
Keep electrical devices out of reach of children. Never allow children to use electrical devices
unsupervised. Children may not always properly identify possible hazards. Small parts may be fatal if
swallowed. Keep packaging film away from children. There is a risk of suffocation. This device is not
intended for children. If used incorrectly, parts under spring tension may fly out and cause injury to
children (e.g. to eyes).
Important Safety Informations
3
English