Advertisement
Assembling and using the appliance
1. Prepare the ingredients according to
your recipe and fill the jug to the
indicated markings on the jug. Do not
exceed maximum marks indicated.
Always fill between the minimum and
maximum marks indicated on the jug.
2. Attach the mixing jug to the base unit
using the markings on the appliance.
The marking underneath the handle of
the jug will align with the markings on
the base unit.
3. Place the lid on the mixing jug and
rotate the lid clockwise so that it locks
into position. The lid is securely in place
when the lip of the lid aligns with the lip
of the jug and both side fittings have
clipped into place. The appliance will
not start until the lid is correctly fitted.
4. Fit the measuring cap into the top of the
jug.
5. Plug the appliances electrical cord into
the electrical supply. Please ensure that
the voltage of the electrical supply
matches or exceeds that of the
appliance.
6. Press
the
"ON/OFF"
appliance will beep and the "ON/OFF"
button will begin to flash.
7. Select the function of the appliance.
Refer to section "Functions of the
appliance".
8. Once
the
appliance
9. Switch the appliance off and remove
10.Serve according to your recipe.
Please
maximum marks indicated on the jug.
Cold liquids max– 1750ml
Soup max mark– 1400ml
Functions of the appliance
The appliance operates using either
A beep will signal the confirmation of
SMOOTH - For making soup with a
smooth texture.
button.
The
Follow steps 1-6 in "Assembling and using
the appliance".
The soup maker will automatically blend
and heat the ingredients to the pre-set
programme time of 25 minutes.
has
finished
CHUNKY - For making soups with a
7
operating, allow time for the measuring
jug to cool down as it is fitted with a
temperature sensor. To do this, place
1/2 pint of lukewarm water in the jug
and leave to stand for 10 minutes. DO
NOT use cold water cold water as this
could cause thermal shock to the
heating element and damage the
heating element.
the plug from the socket.
note:
Do not exceed the
the power control button or with the
function buttons.
the button selection.
Advertisement
