Upgrade - Honeywell VISTA-ICM Installation And Setup Manual

VISTA-ICM Installation and Setup Guide

Upgrade

The Upgrade page will allow you to select any node on the network, and upgrade the
firmware. Firmware upgrades will be available periodically to enable new features and
add functionality. Click the link marked "Latest Version Info" to find out if there is a
new version of firmware available.
To upgrade a specific VISTA-ICM, select the node you want to upgrade from the list.
Click the Auto Update button to retrieve the latest version of firmware from the server
on the Internet. This requires the VISTA-ICM to be attached to the Internet. The
update process can take several minutes depending on the network connection speed.
The firmware image is typically larger than 1 megabyte.
NOTE: After a flash upgrade has been performed, you must reset the VISTA-ICM to
the factory defaults and perform the setup procedure again.
Figure 20 – Upgrade
23