Honeywell VISTA-ICM Installation And Setup Manual page 21

If the VISTA-ICM is online, click on the IP address link to get more diagnostic
information about the VISTA-ICM.
Figure 14 - Diagnostic Details Page
The details page includes the following information:
•
Time Online – This shows how long the VISTA-ICM has been running.
•
Version/Date – This shows the build version of the firmware, devices and style
installed on this VISTA-ICM, as well as the date it was built.
•
Restart – This button will restart the VISTA-ICM, and will reload the last saved
configuration.
•
Reset – This button will erase all configuration information and restart the VISTA-
ICM. If the VISTA-ICM is connected to a serial controlled device, and that device is
powered on, the VISTA-ICM will attempt to auto-detect the connected device type.
•
Password – You can set a setup password, or clear the password from this page.
•
Startup – You can change the default start page and options from this menu.
•
Port List – This lists all the ports on the VISTA-ICM, and the device selected for
each port.
•
Unit List – This lists all the units on the VISTA-ICM, from all ports on the VISTA-
ICM. A device may have several units if it performs several functions. For example
a combination DVD/VCR has two units, a DVD player and a VCR.
Each unit can have variables and commands. The Variables link shows all the
variables for that unit, and the commands link lists all the commands for that unit. If
the command exists, the link on the command will execute the command.
VISTA-ICM Installation and Setup Guide
17