How To Dispense Hot Water; Accessing The Settings Menu And Changing The Settings - Smeg ECF01 User Manual

6. Once the volume of milk has doubled,
immerse the frothing nozzle for
cappuccino all the way and heat the milk
up to 60°C. Stop the steam by turning
the steam knob to the right.
7. Pour the milk into the cups with the
espresso.
• To prepare more than one
cappuccino, first prepare all the
necessary cups of espresso, then
steam the milk for all the
cappuccinos together.
• For reasons of hygiene, it is
advisable to clean the frothing
nozzle for cappuccino after use.
• Discharge any milk residue by
turning the steam nozzle to let the
steam out.
• Do not dispense steam for longer
than 60 seconds.
36
Use

3.5 How to dispense hot water

1. Turn the machine on using the ON/OFF
switch and wait until the coffee
dispensing indicator lights are no longer
blinking.
2. Position a container underneath the
frothing nozzle for cappuccino.
3. Turn the steam knob to the
to let out the hot water.
• Do not dispense steam for longer
than 60 seconds.
3.6 Accessing the settings menu and
changing the settings
1. Ensure that the machine is ready for use,
then press and hold the
10 seconds until the three buttons start
flashing: the machine is now in settings
mode.
2. Adjust the machine settings to your
requirements.
3. To exit the menu, just wait 15 seconds
without pressing any buttons.
position
button for