Pretalk Interface
▪
Select here the desired Pretalk Interface:
Not used
Telephone
Pretalk (XLR)
Telephone + Pretalk (XLR)
Telephone with control
▪
If selected the telephone can operate the hybrid via DTMF tones,
e.g. switch to ON AIR, activate AGC etc.
Hold Signal Source
▪
The HOLD signal can be generated from the following sources:
ON AIR in (XLR)
HOLD in (XLR)
Recorded Hold Signal
Pause between repetition
▪
If Recorded Hold Signal is set as HOLD signal source, a Pause
between Repetition can be defined
HOLD Signal duration
▪
After loading the Recorded Hold Signal file via the Load file
button the HOLD signal duration will be displayed in seconds
The format of the WAV file must be: 8-kHz/Mono/16 Bit
Audio Interfaces (1)
15