Basic Configuration - AVT MAGIC TH1 potsGo Configuration Manual

Connect your MAGIC TH1 system via the LAN

interface to your IP network
 The easiest way to obtain a valid IP address is to
activate DHCP in the system via the front panel
▪
Press the softkey MENU and select LAN INTERFACE
→ DHCP and set the checkbox ENABLE
▪
Press the DROP key and save the configuration
▪
The assigned IP address is visible by pressing the
DROP key again
 Alternatively, you can set the desired IP address,
subnet mask, etc. manually under the LAN
INTERFACE menu item
Open now your web browser and enter the IP

address of the MAGIC TH1 system
▪
You can also use the system name TH1go instead of
the IP address if DNS is available
 If everything is correct the main window appears

Basic Configuration

Softkey MENU
DROP key
2