Adaptec ATA II 1220SA Installation And User Manual page 75

Serial ata ii hostraid controllers
Table of Contents

Advertisement

stripe size
The amount of data in each section of a striped array.
striped array
See
RAID
0,
RAID
10.
T
task
An operation that occurs only on the RAID controller, asynchronous to all other operations; for example,
initializing a disk or verifying an array. Some tasks can take an extended period of time, particularly if the
RAID controller is also performing intensive data I/O while the task is running.
V
verify
Low-level check that a drive, logical device, or hot spare is good. In a RAID 1, verify is a low-level check that
contents of both members' segments are consistent and, optionally, corrects errors while assuming that the
master drive is correct. In a simple volume, verify performs a low-level check that the whole drive can be
read.
volume
See
simple
volume,
spanned
volume.
93
Glossary

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ata ii 1430sa1220sa1420sa1430sa

Table of Contents