Table of Contents
Advertisement
The unit has dual-channel watch function. It can monitor two channels at the same time, which are the Main (foreground)
and Group (Background) channels, i.e., it can detect signal on either channel.
When the unit detects a signal on the Group channel, it will automatically sound the received signal with LCD showing
"Group" icon, Group channel number and associated code number.
When you want to talk to a group of people that have their radios set the Group Channel number to be the same as yours,
just do the following.
● Press & hold the GROUP key, LCD displays TX icon, indicating the radio is transmitting on the Group channel.
● Hold the radio in a vertical position with the microphone 3-5 cm from your mouth and then speak.
● When you finish speaking, release the GROUP key.
8.
SENDING CALL TONE
You can use 1 of 10 different "Call Tones" to get attention of other user on the same channel with same code.
● Press the CALL key and the tone will sound, LCD will display the transmit icon T X
9.
SCANNING CHANNELS
● Press the SCAN key once and LCD will display
● LCD display shows the scanning channel one by one.
● It will stop at those channels with signal for a while.
10. MONITOR Function
● Press and hold the MONITOR
● Release the MONITOR key to turn off the function.
The function is useful to check for activity on the main channel before you talk. When you find the main channel busy
, you can change the main channel number to a clear one. Moreover, it also can be handy for the user to verify the
volume level of the radio when the radio is not receiving. You can adjust the volume, if necessary.
11.
LOCK KEYS
● Press and hold
● All keys are locked except PTT and GROUP /OK keys
● To unlock, press and hold
12. MICROPHONE / EARPHONE JACK
The unit is equipped with a microphone / Earphone jack located at the right side. You can use an optional earphone
(not included) for handsfree function.
13. High / low TX Power Selection
The radio has defaut high TX power option for Channels 1 to 7 and 15 to 22. When you know your party is close by, you
key to have the unit sound signal or noise, whichever occurs on the main channel.
key for 3 seconds, LCD display
key for 3 seconds again.
and your call tone will be sent.
and radio will start scanning.
icon.
Hide quick links:
Advertisement
Table of Contents
