Scan - SAMCOM FWCN30A Instruction Manual

Press + or - key to toggle Roger Beep On or Off.
Press PTT to confirm and quit or press MENU to continue next function setting.
16 SCAN
Before you start scanning please preset the CTCSS code to "00" first. Note: if the CTCSS setting is
01 to 38. it can not scan other channel with different CTCSS code.
Press and hold + or - key for at least 3 seconds to start scanning function.
LCD display show the scanning Main channel one by one.
it will stop at those main channel with signal for a while. And then continue scanning
Or if you want to use this channel, press PTT to confirm and your radio will change to this channel.
Note: Please aware that you can listen to other radio on.this main channel. If you want to talk to other
radios. Please make sure your radio have the same CTCSS code with the others.
FCC COMPLIANCY DECLARATION
The company Sancon declaration that the device FWAN1A complies will all the requirements specified