Connecting Water Supply - Beko WTE10744X0WST User Manual

• Keep the transportation safety bolts in a safe place for
reuse when the product needs to be moved again in the
NOTE
future.
• Before moving the product, install the transportation
safety bolts in reverse order of the disassembly procedure.

6.4 Connecting water supply

• The water supply pressure required to run the product is
between 1 to 10 bars (0.1 – 1 MPa). (It is necessary to have
10 – 80 litres of water flowing from the fully open tap per
minute.)
CAUTION!
- Attach a pressure reducing valve if water pressure is
• Do not use old or used water inlet hoses on the new
product.
- It may cause stains on your laundry.
• Do not plug the product's cold water inlet to hot water
outlet.
- Your laundry may get damaged or the product will switch
Washing Machine / User's Manual
c) After removing bolts, close the holes with plugs
provided in the user manual bag.
higher.
to protection mode and will not operate.
EN / 17