Innovative 9138 Installation Instructions

Step 5 ADJUSTMENTS
A - HEIGHT ADJUSTMENT
With one hand hold the arm in a horizontal position (zero degrees), use your free
hand to insert the 1/4" allen wrench.
To increase the strength, turn the wrench left
(counter-clockwise).
To decrease the strength, turn the wrench to
the right (clockwise).
B - FRICTION POINTS
(4)
(1)
(2)
(3)
C - TILT - LCD & KEYBOARD
Your assembly and modifi cations are complete. If you need additional assistance
regarding this product or if you need to discuss a return, contact our customer
service department at 800.888.6024 All returned items
must be accompanied by an RMA.
When the arm does not drift up or
downward, your adjustment is set.
Insert the 3/32 allen wrench into the
appropriate set screw - tighten or loosen to
the desire degree of joint friction.
Friction adjustments are located (1) in the
forearm, (2) the forearm's pivot point, (3)
the mount base, 4) the center post located in
the center of the forearm.
If the tilt mechanism is
too tight or to loose,
simply turn the knob until
you reach the desired
tension.
Ergonomic mounting solutions for monitors and keyboards
Model 9138/9139 LCD Monitor Arm

Installation Instructions

Ergo In Demand, Inc.
4900 Industry Drive
Central Point, OR 97502
Contact Information:
800.888.6024 (Toll Free)
541.779.3763 (Office)
541.779.0829 (Fax)
info@ergoindemand.com (Email)