Download Print this page

Advertisement

WARNING: FAILURE TO CAREFULLY FOLLOW ASSEMBLY, SAFETY, AND OPERATION
INSTRUCTIONS AND WARNINGS REGARDING THIS PRODUCT MAY RESULT IN BODILY
INJURY AND/OR PROPERTY DAMAGE.
Liability: The manufacturer does not accept warranty claims or liability claims for damages
arising from improper use of Winston-E. For safe use, do not place any objects or body parts
underneath the work surface. Make sure no body parts, objects or furnishings are located above
the Winston-E. When using Winston-E, make sure no hands, fingers or other body parts are near
the lifting column or between the cross beam and work surface. Winston-E must be set on a
level, stable surface for safe use.
Additional Warning: Do not use Winston-E if it has a damaged cord or plug. Winston-E
should not be carried by the cord. Pull on the plug, not the cord, to unplug Winston-E. Keep
liquids away from Winston-E. Keep hair, loose clothing, fingers, and body parts away from
openings and moving parts.
Switch off power supply and remove main power supply plug before installation or
troubleshooting. Ensure no cables or cords can get jammed or stripped when raising or
lowering Winston-E. Ensure all wires are not entangled in the Winston-E and have enough
length when the unit is raised to the desired height.
WINSTON-E IS NOT A TOY. Children should not use Winston-E. Do not crawl, lie, or move
around the unit. Do not sit, kneel, or stand on the work surface. Do not use Winston-E if you
are distracted or are under the influence of medications that can cause diminished control.
Winston-E is not a toy and should only be installed and used by someone familiar with and
capable of adhering to the warnings and instructions.
Winston-E includes a 5 year limited warranty. This limited warranty covers any defects in materials and workmanship of the product. This limited warranty may
not cover problems, damage or injuries caused by misuse, accidents or abuse. The manufacturer may require proof of purchase before performing any repairs or
replacing products during the warranty period. This warranty is non-transferable and applies only to the original purchaser.
800.524.2744 www.LCDarms.com
WARNING
WARRANTY
PAGE 1 OF 11
WINSTON-E
© 2016 Innovative Office Products, LLC
P512715 REV B

Advertisement

loading
Need help?

Need help?

Do you have a question about the WINSTON-E Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Innovative WINSTON-E Series

  • Page 1 The manufacturer may require proof of purchase before performing any repairs or replacing products during the warranty period. This warranty is non-transferable and applies only to the original purchaser. 800.524.2744 www.LCDarms.com PAGE 1 OF 11 © 2016 Innovative Office Products, LLC P512715 REV B...
  • Page 2: Table Of Contents

    Winston-E Triple ™ Installation Instructions STEP 1 | FREESTANDING BASE ..........Page 4 STEP 2 | WORK SURFACE ............... Page 5 STEP 3 | WINGS ..........................Page 7 STEP 4 | MONITOR TILTER ..................Page 9 STEP 5 | CABLE MANAGEMENT ..............Page 10 STEP 6 | BUTTON PROGRAMMING ..........Page 11 800.524.2744 www.LCDarms.com...
  • Page 3 Winston-E Triple ™ Parts List Freestanding Base Left Wing Standard Monitor Tilter 3/32" Allen Wrench 412268 312270-22-L 405397 700146 M6 x 1 x 16mm FPhMS Right Wing M4 x 12 mm PhPHS 1/8" Allen Wrench 702013 312270-22-R 702096 701312 Work Surface Column Mount Dog Washer 7/32"...
  • Page 4: Step 1 | Freestanding Base

    STEP 1 FREESTANDING BASE 800.524.2744 www.LCDarms.com PAGE 4 OF 11...
  • Page 5: Step 2 | Work Surface

    STEP 2 WORK SURFACE 800.524.2744 www.LCDarms.com PAGE 5 OF 11...
  • Page 6 STEP 2 WORK SURFACE Place the utility tray on top of the work surface by aligning the (4) tabs on utility tray with recessed areas on work surface plate. With the tabs aligned, slide utility tray towards the column to secure into place. 800.524.2744 www.LCDarms.com PAGE 6 OF 11...
  • Page 7: Step 3 | Wings

    STEP 3 WINGS Tension can be tightened or loosened as shown. 3/32" 800.524.2744 www.LCDarms.com PAGE 7 OF 11...
  • Page 8 STEP 3 WINGS 800.524.2744 www.LCDarms.com PAGE 8 OF 11...
  • Page 9: Step 4 | Monitor Tilter

    STEP 4 MONITOR TILTER 7/32" 7/32" Tension can be tightened or loosened as shown. 1/8" 800.524.2744 www.LCDarms.com PAGE 9 OF 11...
  • Page 10: Step 5 | Cable Management

    STEP 5 CABLE MANAGEMENT 800.524.2744 www.LCDarms.com PAGE 10 OF 11...
  • Page 11: Step 6 | Button Programming

    STEP 6 BUTTON PROGRAMMING HOW TO PROGRAM With work surface at its lowest position, Press up or down button to stop the Wait several seconds for light to blink. press up button and release. work surface at desired height. While light is blinking, press up and down buttons at the same time and release.

This manual is also suitable for:

Winston-e triple