Innovative UltraRack URPS Assembly Instructions

Innovative UltraRack
Install Total Lock Caster Wheels.
Secure to Support Tubes P/N 220-001.
Slide Inside Frame Post
(P/N 220-004) into Frame post.
Install Index Plate lower bolt
(finger-tight only).
Upper T-Frame
Height Adjustment
Insert T-Frame Tubes.
Upper T-Frame P/N 220-007.
Lower T-Frame P/N 220-006.
U.S. PATENT 7,448.606
Paint Stand • Assembly Instructions
1
Attach Support Tubes to Frame Base
tube (P/N 220-002); tighten firmly.
4
Install Trunnion Bracket
(P/N 220-005) using
screw, through upper
lower T-Frame
7
Insert Support Arms.
See arrows - hooks point away from
center of UltraRack.
2
5
⁄  x 2 cap
3
8
Index Plate hole.
Top Hooks UP
Bottom Hooks DOWN
8
Insert T-Handle
Attach Frame Post (P/N 220-003)
to Frame Base Tube; tighten firmly.
Insert T-handle.
Insert T-Handle
Attach Locking Hex Nut to the 2 Cap
Screw from step 5. Do not overtighten.
Trunnion Bracket should rotate freely.
Now firmly tighten lower Index Plate bolt.
Put left and right Extension arms
into storage position. For use with
pickup tailgates only.
™
3
6
9