Selecting And Arming/Disarming Alarms; Backup Alert - Timex W-195 Manual

Selecting and Arming/Disarming Alarms

Press and release MODE until you see "ALARM" on the
display.
Press and release STOP/RESET to select an Alarm
(AL-1 through AL-5)
Arm or disarm the selected Alarm by pressing
START/SPLIT. The word "ON" and the
next to the Alarm time when the Alarm is armed.
The icon will also be visible in TIME mode if any one of
the Alarms is armed. When the Alarm is armed, it will
generate an alert at the set time.
44
icon will appear

Backup Alert

When the Alarm time arrives, the watch will generate an
alert for 20 seconds. You may press any button on the
watch to silence this alert. If you don't silence the alert,
the watch will assume that you missed that Alarm time
and will automatically enable a backup alert, indicated by
a flashing icon on the display, which will sound five
minutes after the Alarm time.
45