Sli Tm; Tm Tm; Tm And Quad Sli Tm Operation Guide; Installing Two Sli Tm -Ready Graphics Cards - ASROCK X399 Phantom Gaming 6 User Manual

TM
2.8 SLI , 3-Way SLI
This motherboard supports NVIDIA® SLI
Link Interface) technology that allows you to install up to four identical PCI
Express x16 graphics cards.
Requirements
1. You should only use identical SLI
2. Make sure that your graphics card driver supports NVIDIA® SLI
3. Make sure that your power supply unit (PSU) can provide at least the minimum
2.8.1 Installing Two SLI
30
TM
and Quad SLI
fied.
Download the drivers from the NVIDIA® website: www.nvidia.com
power your system requires. It is recommended to use a NVIDIA® certified PSU.
Please refer to the NVIDIA® website for details.
TM
-Ready Graphics Cards
TM
Operation Guide
TM TM
, 3-way SLI and Quad SLI
TM
-ready graphics cards that are NVIDIA® certi-
Step 1
Insert one graphics card into PCIE1 slot
and the other graphics card to PCIE2 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
If required, connect the auxiliary power
source to the PCI Express graphics cards.
TM
(Scalable
TM
technology.