Limit Switch Setting - fadini BARRI 88 Instruction Manual

BARRI 88

LIMIT SWITCH SETTING

The two screws for limit switch adjustment are to be unlocked first to be allowed then to be set in the required position. To do this,
unscrew by two turns the locking screw positioned between them.
Once satisfied the beam is in the correct position and a couple of operations performed to assess this, tighten the central screw to
"lock back" the adjustment screws (Pic. 10).
1st OPERATION
UNSCREW
ADJUSTMENT
SLOWING DOWN AT END OF MOVEMENTS
+ slowdown
- slowdown
BARRI 88 LEFT
SLOWDOWN
SETTING
CLOSING
Oil-hydraulic road barrier with beam of 4 meters
BARRI 88 LEFT
LIMIT SWITCH
ADJUSTMENT
HORIZONTAL BEAM
LIMIT SWITCH
LOCK
ADJUSTMENT
VERTICAL BEAM
BARRI 88 RIGHT
SLOWDOWN
SETTING
OPENING
2nd OPERATION
BARRI 88 RIGHT
LIMIT SWITCH
ADJUSTMENT
VERTICAL BEAM
LIMIT SWITCH
ADJUSTMENT
HORIZONTAL BEAM
+ slowdown
- slowdown
BARRI 88 LEFT
SLOWDOWN
SETTING
OPENING
7
3rd OPERATION
TIGHTEN
ADJUSTMEN
LOCK
Pic. 10
BARRI 88 RIGHT
SLOWDOWN
SETTING
CLOSING
Pic. 11