Philips SP9863 Manual page 35

Shaver
Problem
The appliance
does not work
when I press the
on/off button.
The appliance do
es not shave as
well as it used to.
I replaced the
shaving heads,
but the display
still shows the
replacement
reminder.
A shaving unit
symbol has
suddenly
appeared on the
display.
Possible cause
The appliance is still
placed on the
wireless charger.
The rechargeable
battery is empty.
The travel lock is
activated.
The shaving unit is
soiled or damaged
to such an extent
that the motor
cannot run.
The shaving heads
are damaged or
worn.
Hairs or dirt obstruct
the shaving heads.
You have not reset
the appliance.
This symbol reminds
you to replace the
shaving heads.
English
Solution
Remove the appliance
from the wireless charger
and press the on/off
button to switch on the
appliance.
Recharge the battery
(see 'Charging').
Press the on/off button
for 3 seconds to
deactivate the travel lock.
Clean the shaving heads
thoroughly or replace
them.
Replace the shaving
heads (see
'Replacement').
Clean the shaving heads
in the regular way or
clean them thoroughly.
Reset the appliance by
pressing the on/off
button for approx. 7
seconds.
Replace the shaving
heads (see
'Replacement').
35