Handle Removal; Cartridge Replacement - Black & Decker Amherst Price Pfister 49 Series Installation Instructions Manual

17
17A
17C
17E

17 HANDLE REMOVAL

Carefully pry off Handle Cap (17A). Remove Lever Retaining Screw (17B), Handle Lever
(17C) and Handle Skirt (17D) from Control Body (17E).
Reassemble handle by reversing steps.
18
18A
18B

18 CARTRIDGE REPLACEMENT

Turn off water supplies and relieve pressure before working on your faucet (see
step 2). Remove Handle (See step 17) Remove the Dome Cap (18A) by unscrewing it in
a counterclockwise direction. Using an adjustable wrench, unscrew the Retainer Ring
(18B). Carefully remove the Cartridge (18C) by pulling it straight up and out. Inspect
Cartridge (18C) for debris or damage. Clean or replace the Cartridge (18C).
Reassemble faucet by reversing steps.
ENGLISH
17B
17D
18C
5
CAUTION: Maintenance
DISASSEMBLY
1. Replacement parts may be available at the store where you purchased
your faucet.
2. When replacement parts are not available, please write or call Price Pfister
Consumer Service.
3. Always turn off water and relieve pressure before working on your
faucet.
NOTE: Trim Care
Cleaning Instructions:
For all Handles and decorative finishes, use only a soft damp cloth
to clean and shine. Use of polish, detergents, abrasive cleaners,
organic solvents or acid may cause damage. Use of other than
a soft damp cloth will nullify our warranty!
Special Trim:
Trim products which contain Porcelain or other similar substance
are not acceptable for public areas or Commercial use. Installation
of Said Trim is at Users Risk!
1–800–PFAUCET (1–800–732–8238)
For Toll-Free Pfaucet information call
1–800–PFAUCET (1–800–732–8238)
or visit www.pricepfister.com
• Installation Support
• Care and Warranty Information