Set Up Instructions - Health O Meter 2210KL User Instructions

SET UP INSTRUCTIONS

Activating/Deactivating Sound
A tone sounds whenever a weight is locked or a button is pressed. (Factory setting is "on") The scale
can be set to stay silent or beep while operating the scale. Follow this procedure to set the preferred
option.
1. Press ON/ZERO and wait for the scale to display "0.0".
2. Hold down MENU and press RECALL . "Set-0" will be displayed and the "0" will be flashing.
button repeatedly until "Set-5" appears. Press ENTER.
3. Press the
button must be pressed quickly after "Set-0" appears or the scale will return to zero.
Note: the
4. "11011" will appear on the display. The sound setting is changed with the first digit "11011".
5. With the first digit flashing on the display, select "1" or "0" for your preferred option. Use the
and buttons to input your desired setting.
a. To keep sounds on, select "1". Example: Sound on = 11011
b. To turn sound off, select "0". Example: Sound off = 01011
6. Press ENTER when your selection is complete. Press ENTER to advance to the next
digit / setting. If no other settings need to be changed press ENTER repeatedly until the scale
returns to zero.
Programming Auto-Off Time
The 2210KL / 2210KL4 has been pre-set at the factory to shut down after one minute of inactivity.
This can be changed to any increment (from 12 seconds to 25 minutes) to suit your needs.
1. Press ON/ZERO and wait for the scale to display "0.0".
2. Hold down MENU and press RECALL. "Set-0" will be displayed and the "0" will be flashing.
button repeatedly until "Set-3" appears. Press ENTER.
3. Press the
button must be pressed quickly after "Set-0" appears or the scale will return to zero.
Note: the
4. The Auto-Off time currently programmed in the scale will display as minutes and tenths of minutes
(i.e. "03.2"); the far left digit will be flashing. Use the
press ENTER to advance to the next digit. For example, setting the time to "00.5" will turn the
scale off after 30 seconds of no use; "02.0" will turn the scale off after 2 minutes; "25.0" will turn
the scale off after 25 minutes.
5. Press ENTER when complete to save and return to normal weighing operation.
Unit of Measure Configuration (LB / GM or LB / KG)
The unit of measure may be displayed in lb / grams (i.e. 2541 gram) or lb / kilograms (2.541 kg).
(Factory setting is pounds / grams) Follow this procedure to set the preferred option.
1. Press ON/ZERO and wait for the scale to display "0.0".
2. Hold down MENU and press RECALL. "Set-0" will be displayed and the "0" will be flashing.
3. Press the button repeatedly until "Set-5" appears. Press ENTER.
button must be pressed quickly after "Set-0" appears or the scale will return to zero.
Note: the
4. "11011" will appear on the display. The unit of measure setting is changed with the fifth digit
"11011".
5. Press ENTER until the fifth digit is flashing. Use the
setting.
a. To weigh in pounds/kilograms, select "0".
b. To weigh in pounds / grams select "1".
Example: LB / KG display = 11010
6. Press ENTER when your selection is complete and the scale will return to zero.
P/N UM2210KL 2210KL4 Rev20190312_Web
and buttons to set the desired value,
and buttons to input your desired
LB / GM display = 11011
8