Health O Meter 2210KL User Instructions page 13

High resolution digital neonatal/pediatric tray scale
Hide thumbs Also See for 2210KL:
Table of Contents

Advertisement

Available languages

Available languages

OPERATING INSTRUCTIONS (CONT)
Reweigh
The Reweigh function is used to reweigh the baby while he or she is still on the tray.
To reweigh, the baby should remain on the tray and a weight measurement should be on the display.
Simply press REWEIGH/ RECALL.
Recall
The Recall function is used to recall the last weight measurement after the scale has shut down or
the display was cleared.
The scale automatically stores the last weight measurement. This value is stored until a new
measurement is taken or it is intentionally cleared by pressing ON/ZERO.
To recall a weight value after the baby's weight has been measured, the baby has been removed
from the tray and the display is off, press ON/ZERO and then REWEIGH/ RECALL. The stored
value will now display.
To clear the recalled weight and unlock the scale for more weighing, either press RECALL or
ON/ZERO.
Motion Detection
Motion detection uses a proprietary technology that automatically provides accurate weight
measurement when there is motion on the tray.
If there was considerable motion during the weight measurement, motion detection will activate after
seven seconds and "AVERAGE WT" will be displayed along with the weight measurement and
"PRIOR WT".
PRIOR WT
AVERAGE WT
gram
Motion detected during weighing
Battery Life Indicators
This scale has excellent battery life with most users getting more than two years from a single set of
batteries. Your battery longevity will vary with the frequency of use and the length of the Auto-Off
timer. To help ensure you are never without the use of your scale, the display shows the amount of
charge left in the batteries.
• Battery Icon: Located in the bottom left corner of the LCD display is an icon of a battery. With
new batteries, all three segments will be dark. As the batteries become depleted, the segments will
turn off.
• Flashing Battery: When the battery icon is empty and the frame is flashing, replace the batteries.
NOTE: Properly dispose of old batteries. Install six (6) new alkaline C-cell batteries. Do not mix new
and used batteries.See page 7 for battery replacement instructions.
Battery Indicators
P/N UM2210KL 2210KL4 Rev20190312_Web
13

Hide quick links:

Advertisement

Chapters

Table of Contents
loading

This manual is also suitable for:

2210kl4

Table of Contents