Troubleshooting; Disposal - Parkside PDBS 1800 A1 Original Instructions Manual

Troubleshooting

Fault Possible
cause
Speed too Motor parts
slow, air jamming due
escapes from to dirt .
the outlet .
Pressure
supply too
low .
Tool does Motor is
not move; jammed due
compressed to material
air escapes build-up .
completely
through the
outlet .
PDBS 1800 A1

Disposal

Remedy
Do not dispose of the tool in the normal
Check the
domestic waste!
pressure
Your local community or municipal authorities can
supply filter
provide information on how to dispose of the worn-
for contamina-
out tool .
tion .
Check the
pressure sup-
ply filter for
contamination .
Lubricate the
tool as de-
scribed in the
instructions .
If necessary,
repeat the
steps outlined
above .
Lubricate the
tool as de-
scribed in the
Dispose of lubricants and cleaning agents in an
instructions .
environmentally friendly manner . Observe the legal
regulations .
■
■
The packaging consists of environmentally
friendly material . It can be disposed of in
local recycling containers .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary .
The packaging material is labelled
with abbreviations (a) and numbers
(b) with the following meanings:
1–7: plastics,
20–22: paper and cardboard,
80–98: composites
Your local community or municipal
authorities can provide information
on how to dispose of the worn-out
product .
Dispose of lubricant residues at a disposal
point . Do not allow lubricants to enter drains or
watercourses . Do not allow them to get into the
subsoil/soil . Make sure you use a suitable mat/
surface . Dispose of lubricants in accordance
with official regulations .
Dispose of contaminated maintenance material
and consumables at a collection point provided
for this purpose .
GB │ IE │ NI │ 13 ■